1、使用中應盡量避免磕碰及跌落；
1. Bumping and falling should be avoided as much as possible during use;
2、嚴禁敲擊及用尖硬物碰撞顯示區域；
2. It is strictly prohibited to knock or collide with sharp hard objects in the display area;
3、應平穩施力，嚴禁超過檢測范圍使用；
3. The force should be applied smoothly, and it is strictly prohibited to use it beyond the detection range;
4、長期停用應將電池取出，以防電池漏液；
4. Take out the battery after long-term shutdown to prevent battery leakage;
5、嚴禁使用強溶劑（如苯、硝基類油）擦拭面板及顯示區域；
5. It is strictly prohibited to use strong solvents (such as benzene, nitro oil) to wipe the panel and display area;
6、嚴防液體進入扳手內，以免損壞電子元件；
6. Strictly prevent liquid from entering the wrench to avoid damaging electronic components;
7、當電池電壓降到不能工作時，應更換電池；
7. When the battery voltage drops to a point where it cannot operate, the battery should be replaced;
8、嚴禁隨意拆卸，以免影響精度，如遇問題，請與廠家或銷售商聯系；
8. It is strictly prohibited to disassemble at will to avoid affecting the accuracy. In case of any problem, please contact the manufacturer or seller;
9、使用后應回包裝盒內；
9. Return to the packaging box after use;
10、調校方法僅供計量校驗人員參考，其他人員勿動；
10. The calibration method is only for reference by metrological calibration personnel, and other personnel are not allowed to move;
11、自銷售之日起半年內，在正常使用中，非人為因素導致的產品故障均屬保修范圍
11. Within six months from the date of sale, during normal use, product failures caused by non human factors are covered by the warranty
For more information on the price of torque wrench or detailed content, please visit our company's website: http://www.ykmzc.com There will be a lot of content on the website for reference only.
