定扭矩電動扳手由主機和控制儀兩部分組成。定扭矩電動扳手主機采用雙重絕緣單相串激式電動機和減速機構，構造新穎、體積小、重量輕、平安牢靠。由于采用靜扭構造，運轉平穩，無振動、無沖擊，噪音小，操作者不受反力矩的影響，因此勞動強度低。
The constant torque electric wrench is composed of the main engine and the controller. The main engine of fixed torque electric wrench adopts double insulated single-phase series excitation motor and speed-reducing mechanism, which has novel structure, small size, light weight, safety and reliability. Because of the static torsion structure, smooth operation, no vibration, no impact, low noise, the operator is not affected by the reaction moment, so the labor intensity is low.
額定扭矩N.m :300
Rated Torque N.m:300
調理范圍N.m:100-300
Conditioning range N.m:100-300
控制精度:±5%
Control accuracy: +5%
工作頭轉速r/min:15
Working head speed r/min:15
額定電壓V:220
Rated voltage V:220
額定電流A:2.1
Rated current A:2.1
邊心距：40
Margin center distance: 40
主機外形（長直×徑）:40×80
Main Engine Outlook (Length, Straight, Diameter): 40 x 80方頭尺寸:19×19
Square Head Size: 19 x 19
套筒型號:27#、32#
Sleeve type: 27 #, 32#
主機凈重kg:5
Net weight of main engine kg:5
控制儀尺寸（長×寬×高）:160×100×60
Size of Controller (Length *Width *Height): 160 *100 *60控制儀重量kg:1.1
Controller weight kg:1.1
備注：1.套筒尺寸可按用戶請求而定，普通按表中規則配套。2.產品外形及尺寸如有變動不另行通知。
Remarks: 1. Sleeve size can be determined according to user's request, usually matched according to the rules in the table. 2. No notice will be given for any change in the shape and size of the product.
本文來源：
電動扭矩扳手http://www.ykmzc.comSource: Electric Torque Wrench http://www.ykmzc.com
