角向扭剪電動扳手是一種用于緊固螺栓、螺釘?shù)冗B接件時進行控制扭矩和角度的工具。它通常應用于需要嚴格控制緊固件預緊力的工程領域，如汽車制造、航空航天、機械制造等。
Angular torsion shear electric wrench is a tool used to control torque and angle when tightening bolts, screws, and other connectors. It is usually applied in engineering fields that require strict control of fastener preload, such as automotive manufacturing, aerospace, mechanical manufacturing, etc.
以下是關于角向扭剪電動扳手的一些基本知識：
The following are some basic knowledge about angular torsion shear electric wrenches:
工作原理：角向扭剪電動扳手通過內置的電動驅動系統提供旋轉動力，通過電子控制系統精確控制扭矩和角度。它通常配備了傳感器來檢測扭矩和角度，并可以根據預設參數進行自動調整。
Working principle: The angular torsion shear electric wrench provides rotational power through the built-in electric drive system, and accurately controls torque and angle through the electronic control system. It is usually equipped with sensors to detect torque and angle, and can be automatically adjusted according to preset parameters.
扭矩控制：角向扭剪電動扳手能夠控制所施加的扭矩大小。扭矩通常以牛頓米（N·m）為單位進行測量。通過電子控制系統，可以設置所需的扭矩?cái)?shù)值，并在達到預設值時停止扭矩輸出，以確保連接件被正確地預緊。
Torque control: The angular torsion shear electric wrench can control the amount of torque applied. Torque is usually measured in Newton meters (N · m). Through the electronic control system, the required torque value can be set and the torque output can be stopped when the preset value is reached to ensure that the connecting parts are correctly pre tightened.
角度控制：除了扭矩控制外，角向扭剪電動扳手還可以控制連接件的角度。角度通常以度（°）為單位進行測量。通過電子控制系統，可以設置所需的角度數值，并在達到預設角度時停止旋轉，確保連接件被正確地旋轉到指定角度。
Angle control: In addition to torque control, the angle shearing electric wrench can also control the angle of the connecting piece. Angles are usually measured in degrees (degrees). Through the electronic control system, the required angle value can be set and the rotation can be stopped when the preset angle is reached, ensuring that the connector is correctly rotated to the specified angle.
數據記錄和分析：許多角向扭剪電動扳手具備數據記錄和分析功能。它們可以記錄每次緊固操作的扭矩、角度等參數，并將這些數據保存在內部存儲器或通過無線通信傳輸?shù)接?jì)算機或云端。這些數據可以用于質量控制、質量驗證和故障分析等用途。
Data recording and analysis: Many angular torsion shear electric wrenches have data recording and analysis functions. They can record parameters such as torque and angle for each tightening operation, and store these data in internal memory or transmit them to a computer or cloud through wireless communication. These data can be used for quality control, quality verification, and fault analysis purposes.
使用注意事項：使用角向扭剪電動扳手時，需要遵循一些注意事項。例如，確保選擇正確的扭矩和角度參數，定期校準和維護扳手，避免超過設定的扭矩和角度范圍，避免使用扳手在超出其額定能力的工作條件下操作等。
Precautions for use: When using an angle shear electric wrench, it is necessary to follow some precautions. For example, ensuring the correct torque and angle parameters are selected, regularly calibrating and maintaining wrenches, avoiding exceeding the set torque and angle range, and avoiding using wrenches to operate under working conditions beyond their rated capacity.
需要注意的是，具體的角向扭剪電動扳手的技術細節和操作方法可能因不同的和型號而有所差異。因此，在實際使用時，建議參考相關的使用手冊和操作指南，以確保正確而地使用角向扭剪電動扳手。
It should be noted that the technical details and operating methods of the specific angular shear electric wrench may vary depending on different brands and models. Therefore, in practical use, it is recommended to refer to the relevant user manual and operating instructions to ensure the correct and safe use of the angle shear electric wrench.
